Heritage Geophysics
Heritage Geophysics Available Instruments and Products home rentals Heritage Geophysics Available Instruments and Products case histories Heritage Geophysics Available Instruments and Products second hand Heritage Geophysics Training training Heritage Geophysics Available Instruments and Products international sales Heritage Geophysics Available Instruments and Products contact Heritage Geophysics Available Instruments and Products sitemap Heritage Geophysics Available Instruments and Products
Heritage Geophysics Available Instruments and Products
Resistivity Meters & Imaging Systems
Resistivity Meters
Resistivity Imaging Systems
Resistivity Monitoring Systems
Resistivity Software

Induced Polarization
IP - Receivers
IP - Transmitters

Electromagnetics
Multi Frequency EM
T-VLF System

Logging Probes
Borehole Logging Probe

Magnetic Susceptibility Meters
SM-30 Field
SM-100 Lab
SM-105 Lab
SM-400 In-Situ

Magnetometers
Magnetometers

Magnetic Resonance Systems
NUMIS & NUMIS Plus

Seismographs
Land Seismographs
Marine Seismographs

Seismometers
Sensors

Magnetotelluric
StrataGEM

Resistivity Monitoring Systems



Syscal Pro Resistivity Monitoring(ERT) System

Turn Key System for Remote, Unattended Monitoring

Syscal Pro Resistivity Monitoring(ERT) System

The Syscal Pro is a ten channel resistivity meter with many standard features that allow it to function as a stand alone monitoring system, or with use of a local PC and optional software, as an unattended monitoring system. The system may be remotely accessed for data retrieval and system updates.

The Syscal Pro features high transmitting power, up to 1,000V, at a maximum 2.5A, and 250W. Power that is often needed for cross hole applications, and for the long arrays as may be needed to monitor large sites. It also offers two separate alarm times that may be scheduled during a twenty four hour period. Connection to an external modem is standard. The unit may be equipped with internal switches to support up to 192 electrodes. It will also support connection of external switching boxes supporting up to 4,000 electrodes. Thus, for many sites the Syscal Pro in its standard form may be quite adequate.

On sites that require more than one type of array to be run, or sites that may need array schedules that vary with day of the week, or some other schedule, a software package called ComSys is offered. ComSys permits the operator to schedule a specific array to be run at whatever time is needed. The Comsys package requires a local PC, which will also be the storage device. If the PC is set up on a network, then the Syscal Pro may be remotely interrogated, new arrays may be downloaded, and the sampling schedule may be revised.

Related Information:
Download Brochure Download Brochure
   
Email For Pricing & Availability
back to top BACK TO TOP back to top


home rentals case histories second hand international sales contact sitemap

Heritage Geophysics Inc.   625 Valley Road, Littleton, CO 80124   Tel & Fax: (303) 790-4237   Cell (720) 320-2821

1998-2008   Heritage Geophysics Inc.   All rights reserved.

r1 r2 r3 r4 r5 r6 r7